GETTING STARTED WITH YOUR BABY'S BREW WARMER

Unlock the ultimate feeding experience with Baby's Brew. Conveniently warm anytime, anywhere without the need for an outlet. Say goodbye to the hassle of warming bottles by boiling, steaming or microwaving and learn how to effortlessly warm bottles to the perfect temperature every time.

WHAT'S INCLUDED

Items included vary depending on which option you choose when purchasing your warmer. Filter through the images below to view items included with each option.

YOUR FIRST WARMING

1. Fill your bottle with breastmilk, water, or *formula. We recommend adding powdered formula to the bottle after warming for best results.

2. Ensure your silicone gasket is correctly placed inside your warmer basin. If needed, twist your adpater onto warmer. The adapter will also have an gasket/ring that fits in the top of the adapter. Gasket/rings are required to ensure no leakage and should be in good condition.

3. Flip warmer upside down and twist bottle onto warmer. Do not over tighten.

4. Long press the button on the bottom of your warmer until your warmer powers on.

5. Single press the button on the bottom of your warmer to select your desired temperature.

6. Once temperature is selected, flip your warmer back upright. Your warmer will make a beep sound when desired temperature is met.

CLEANING

PORTABLE BOTTLE WARMER

1. Unplug the USB-C cable and ensure the USB protective flap is sealed.

2. Long press the button on the bottom to power off.

3. Clean with water and soap then dry.

SILICONE GASKET/RINGS

1. Remove silicone rings from warmer and/or adapter.

2. Use water and soap, place in dishwasher, or sterilizer to clean

SANITIZING

We suggest sanitizing your bottle warmer every 2-3 weeks.

1. Pour white vinegar/warm water mixture into the warmers stainless steel basin, power warmer for 30 minutes to sanitize.

2. Clean and dry the stainless steel thoroughly.

** DO NOT IMMERSE WARMER IN WATER TO CLEAN.

IMPORTANT SAFETY INSTRUCTIONS

1. Always use this product with adult supervision. Keep this product out of reach of children.

2. Clean warmer before first use.

3. Do not use corrosive cleaning agents, antibacterial cleaners, or high concentration detergents. They may cause plastic components to crack. Should this occur, please replace them immediately.

4. Please wash your hands before touching sterilized parts.

5. Do not leave warmer in sunlight or in heat for extended periods of time as it may cause damage to the warmer.

6. After heating liquids, you should check the temperature by putting a drip on the back of your hand.

7. Do not submerge the warmer in any liquid. To was on the go, you can use a baby or breast wipe.

8. Do not touch the stainless steel parts during heating.

9. Let the warmer cool down before cleaning.

10. Unplug warmer when not charging.

11. Do not warm liquids while charging.

12. Extended time on charger can lead to fires or other accidents.

13. Avoid overcharging and shock (such as drops from high surfaces) as this may cause damage to the warmer.

WHEN USING WARMER WITH BREASTMILK

1. Do not leave warmer on for longer than 30 minutes. Nutrients in breastmilk will begin to deteriorate and milk will spoil.

2. When warming breast mil be sure to choose 98 degrees or lower.

3. Warmer cannot be used with frozen breastmilk

4. For best warming results, it is recommended to occasionally swirl breastmilk while warming.